low pressure vessel
英 [ləʊ ˈpreʃə(r) ˈvesl]
美 [loʊ ˈpreʃər ˈvesl]
低压容器
双语例句
- A new low alloying steel with low susceptibility to weld cold cracking has been developed for large heat input welding in pressure vessel engineering.
研制了一种大线能量低焊接裂纹敏感性压力容器用钢，研究了其力学性能、微观组织结构和焊接粗晶热影响区（CGHAZ）的微观组织结构特征及力学性能。 - But due to the low fracture failure probability of the pressure vessel, the cost used to calculate the fracture failure probability by direct Monte Carlo method is rather high.
但对于小概率情形，利用直接抽样的MonteCarlo法进行失效概率计算，费用较高。 - Damage and Cleavage Study on Low Alloy Steel of Pressure Vessel
压力容器用低合金钢的损伤与解理断裂研究 - Research on Design of newly low temperature and high pressure vessel wound by steel strip
新型扁平绕带式低温高压容器设计研究 - Solid solution austenitic stainless steel has high tensile strength and good plasticity, but exhibits low yield strength, thus causing thicker wall thickness of austenitic stainless pressure vessel designed by conventional method with lower material utilization and poorer economic benefit.
固溶态奥氏体不锈钢具有较高的抗拉强度和极好的塑性指标，但因其屈服强度较低而使通常设计制造的奥氏体不锈钢制压力容器壁厚较厚，材料利用率低，经济性较差。 - Experimental investigation of radiation embrittlement effects of low copper reactor pressure vessel steels
低铜压力容器钢辐照脆化效应实验研究 - The edge stress at the joint of the elliptic heads and the cylinder is not calculated in the conventional design of medium and low pressure vessels. However, this edge stress greatly influences the manufacture and use of pressure vessel.
在中、低压力容器常规设计中，对椭圆封头与筒体连接处的边缘应力不做计算，但连接处的边缘应力对压力容器的制造和使用影响较大。 - Current Situation and Development of Steels Used for Low Temperature Pressure Vessel
低温压力容器用钢的现状与发展概况 - Abstract In this paper through a low pressure vessel ammonia leak testing, give out scope and the testing parameter and the testing method and testing points for attention of pressure vessels ammonia leak testing.
本文通过一台低压容器的氨渗漏试验，提出了压力容器氨渗漏试验适用范围，试验参数和试验方法，以及试验过程中应注意的事项。 - Helium Leak Hunting Technique for Low Temperature& Adiabatic Pressure Vessel
低温绝热压力容器氦检漏工艺